Telit Wireless Solutions ME310G1 - AT#SERVINFO - Serving Cell Information

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 213 of 1039 2021-09-23
Not Subject to NDA
3.3.12. AT#SERVINFO - Serving Cell Information
This command reports information about the serving cell.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#SERVINFO
Execution command reports information about serving cell. The information and
the format of the returned message depends on the network type.
GSM network
#SERVINFO:<BARFCN>,<dBM>,[<NetNameAsc>],<NetCode>,<BSIC>,<LAC>,<TA>,<
GPRS>[,[<PBARFCN>],[<NOM>],<RAC>,[PAT]]
LTE network
#SERVINFO:<EARFCN>,<dBM>,[<NetNameAsc>],<NetCode>,<PhysicalCellId>,<TA
C>,<DRX>,<SD>,<RSRP>
The parameters are described in the Additional info sections.
Additional info:
Parameters meaning.
Name
Type
Default
Description
<dBM>
integer
-
received signal strength in dBm.
<NetNameAsc>
string
-
operator name, quoted string or "" if
network name is unknown.
<NetCode>
hex
-
country code and operator code.
<LAC>
integer
-
Localization Area Code
<BSIC>
string
-
Base Station Identification Code