Telit Wireless Solutions ME310G1 - AT+CALD - Delete Alarm

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 501 of 1039 2021-09-23
Not Subject to NDA
3.8.12. AT+CALD - Delete Alarm
This command deletes an alarm in the ME.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT+CALD=<n>
Parameter:
Name
Type
Default
Description
<n>
integer
N/A
alarm index
Value:
0
:
alarm index
AT+CALD=?
Test command reports the range of supported values for <n> parameter.