Telit Wireless Solutions ME310G1 - AT#PCT - Display PIN Counter

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 317 of 1039 2021-09-23
Not Subject to NDA
3.4.2. AT#PCT - Display PIN Counter
This command reports the PIN/PUK or PIN2/PUK2 input remaining attempts, if +CPIN
password is required.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#PCT
Execution command reports the PIN/PUK or PIN2/PUK2 input remaining
attempts, depending on +CPIN requested password, in the format:
#PCT: <n>
Additional info:
Here is shown the parameter meaning.
Name
Type
Default
Description
<n>
integer
N/A
remaining attempts.
Values:
0
:
the SIM is blocked
1÷3
:
if the device is waiting either SIM PIN or SIM
PIN2 to be given.
1÷10
:
if the device is waiting either SIM PUK or SIM
PUK2 to be given.
AT#PCT=?
Test command returns the OK result code.