Telit Wireless Solutions ME310G1 - AT#ECAM - Extended Call Monitoring

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 42 of 1039 2021-09-23
Not Subject to NDA
3.1.2. AT#ECAM - Extended Call Monitoring
This command enables/disables the call monitoring function in the ME.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Specific profile
No
-
2
AT#ECAM=[<onoff>]
Set command enables/disables the call monitoring function in the ME.
Parameter:
Name
Type
Default
Description
<onoff>
integer
0
Enables/disables the call monitoring function in
the ME, that informs the user about call events
(such as incoming call, connected, hang up)
using the following unsolicited indication:
#ECAM:
<ccid>,<ccstatus>,<calltype>,,,[<number>,<type>]
Values:
0
:
disables call monitoring function
1
:
enables call monitoring function
Unsolicited fields:
Name
Type
Description
<ccid>
integer
call ID number
<ccstatus>
integer
call status
Values:
0
:
idle
1
:
calling (MO)