Telit Wireless Solutions ME310G1 - AT+WS46 - PCCA STD-101 Select Wireless Network

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 269 of 1039 2021-09-23
Not Subject to NDA
3.3.33. AT+WS46 - PCCA STD-101 Select Wireless Network
This command selects the cellular network (Wireless Data Service, WDS).
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT+WS46=[<n>]
Set command selects the cellular network (Wireless Data Service, WDS) to
operate with the TA (WDS-Side Stack Selection).
Parameter:
Name
Type
Default
Description
<n>
integer
N/A
WDS-Side Stack to be used by the TA.
27. 4G/2G products support <n> parameter
values 12, 28 and 30. 30 is factory
default
28. 4G only products support <n>
parameter value 28
Values:
12
:
GSM Digital Cellular Systems, GERAN only
28
:
E-UTRAN only
30
:
GERAN and E-UTRAN
<n> parameter setting is stored in NVM, and available at next
reboot.