Telit Wireless Solutions ME310G1 - AT+VTD - Tone Duration

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 47 of 1039 2021-09-23
Not Subject to NDA
3.1.4. AT+VTD - Tone Duration
Set command sets the length of tones transmitted with +VTS command.
3GPP TS 27.007
TIA IS-101
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Common
profile
No
-
2
AT+VTD=<duration>
Parameter:
Name
Type
Default
Description
<duration>
integer
0
duration of a tone
Values:
0
:
the duration of every single tone is dependent
on the network
1÷255
:
duration of every single tone in 1/10 sec
AT+VTD?
Read command reports the current Tone Duration, in the format:
<duration>
AT+VTD=?
Test command provides the list of supported <duration>