Telit Wireless Solutions ME310G1 - AT#BNDTUNER - Antenna Tuner Configuration

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 234 of 1039 2021-09-23
Not Subject to NDA
3.3.22. AT#BNDTUNER - Antenna Tuner Configuration
This command set antenna tuner configuration on selected band. Reboot is required to
be effective. Command is supported only by a subset of modules when
AT#ATUNERSEL=1 is available and set
•
Hardware User's Guide of the used module
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#BNDTUNER=<TunerType>,<DeviceId>,<Band>,<TuneCode>[,<Unused1>[,<Unu
sed2>[,<Unused3>]]]
Parameters:
Name
Type
Default
Description
<TunerType>
integer
0
Select the tuner under configuration.
Allowed valued depends on specific
hardware
Values:
0
:
Default
1
:
Antenna Tuner QAT3516
<DeviceId>
integer
0
Hardware identifier to detect device on
Hardware. Allowed value depends on
specific hardware
Value:
0
:
Only identifier 0 is currently allowed
<Band>
integer
-
Band under tuning. To know the range,
see #BND command.