Telit Wireless Solutions ME310G1 - Time & Alarm; AT+CCLK - Clock Management

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 474 of 1039 2021-09-23
Not Subject to NDA
Time & Alarm
3.8.1. AT+CCLK - Clock Management
The command is related to real time clock management.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT+CCLK=<time>
Set command sets the real-time clock of the module.
Parameter:
Name
Type
Default
Description
<time>
string
N/A
Current time as quoted
string in the format:
"yy/MM/dd,hh:mm:ss±zz"
Values:
yy
:
year (two last digits are mandatory), range is 00..99
MM
:
month (two digits are mandatory), range is 01..12
dd
:
day (two digits are mandatory) The range for dd(day)
depends either on the month and on the year it
refers to. Available ranges are: (01..28) (01..29)
(01..30) (01..31). Trying to enter an out of range value
will raise an ERROR message.
hh
:
hour (two digits are mandatory), range is 00..23
mm
:
minute (two digits are mandatory), range is 00..59