Telit Wireless Solutions ME310G1 - AT#V24 CFG - V24 Output Pins Configuration

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 540 of 1039 2021-09-23
Not Subject to NDA
3.10.8. AT#V24CFG - V24 Output Pins Configuration
This command sets the AT commands serial port interface output pins mode.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#V24CFG=<pin>,<mode>
Set command sets the AT commands serial port interface output pins
mode.
Parameters:
Name
Type
Default
Description
<pin>
integer
0
AT commands serial port interface
hardware pin
Values:
0
:
DCD (Data Carrier Detect)
1
:
CTS (Clear To Send)
2
:
RI (Ring Indicator)
3
:
DSR (Data Set Ready)
<mode>
integer
0
AT commands serial port interface
hardware pins mode
Values:
0
:
AT commands serial port mode: the V24 pins are
controlled by the serial port device driver
1
:
GPIO mode: the V24 output pins can be managed
through the #V24 command