Telit Wireless Solutions ME310G1 - Gnss; GNSS Configuration; ATGPSCFG - Set GNSS Configuration Parameters

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 953 of 1039 2021-09-23
Not Subject to NDA
GNSS
3.25.1. GNSS Configuration
3.25.1.1. AT$GPSCFG - Set GNSS Configuration Parameters
This command sets the following GNSS parameters: WWAN/GNSS startup priority, TBF
(Time Between Fix), constellation and WWAN/GNSS runtime priority and static pinning
operation.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT$GPSCFG=<parameter>,<value>
Parameters:
Name
Type
Default
Description
<parameter>
integer
N/A
selects the configuration parameter to
be set
Values:
0
:
set WWAN/GNSS startup priority
1
:
set TBF
2
:
set constellation
3
:
set WWAN/GNSS runtime priority
4
:
set static pinning operation
<value>
integer
-
value depends on the first parameter.
See Additional info section.
Additional info:
<parameter>=0, in this case the <value> assumes the meaning of
<startup priority>.