Telit Wireless Solutions ME310G1 - Audio; Audio Basic Configuration; AT+CRSL - Ringer Sound Level

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 502 of 1039 2021-09-23
Not Subject to NDA
Audio
3.9.1. Audio Basic Configuration
3.9.1.1. AT+CRSL - Ringer Sound Level
This command is used to select the incoming call ringer sound level of the device.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Common
profile
No
-
2
AT+CRSL=<level>
Set command is used to select the incoming call ringer sound level of the
device.
Parameter:
Name
Type
Default
Description
<level>
integer
2
Incoming call ringer sound level.
Values:
0
:
Level: Off
1
:
Level: Low
2
:
Level: Middle
3
:
Level: High
4
:
Level: Progressive