Telit Wireless Solutions ME310G1 - AT+GCI - Country of Installation

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 62 of 1039 2021-09-23
Not Subject to NDA
3.2.2.10. AT+GCI - Country of Installation
Set command allows to select the installation country code according to ITU-T35 Annex
A.
ITU-T Recommendation V.25 ter
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT+GCI=<code>
Parameter:
Name
Type
Default
Description
<code>
integer
59
installation country code
Value:
59
:
it currently supports only the Italy country code
AT+GCI?
Read command reports the currently selected country code.
AT+GCI=?
Test command reports the supported values of parameter <code>.