Telit Wireless Solutions ME310G1 - AT#FTPFSIZE - Get File Size from FTP Server

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 738 of 1039 2021-09-23
Not Subject to NDA
3.16.7. AT#FTPFSIZE - Get File Size from FTP Server
This command returns the size of a file located on a FTP server.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#FTPFSIZE=<filename>
Execution command, issued during an FTP connection, permits to get the
size of a file located on a FTP server. The response format is:
#FTPFSIZE: <size>
Parameter:
Name
Type
Default
Description
<filename>
string
-
the name of the file that you want to know
the size
Additional info:
Parameter:
Name
Type
Default
Description
<size>
integer
-
dimension in bytes of the file located
on the FTP server
AT#FTPTYPE=0 command must be issued before #FTPFSIZE
command, to set file transfer type to binary mode.