Telit Wireless Solutions ME310G1 - AT#MQCONN - Connect and Log in the MQTT Broker

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 894 of 1039 2021-09-23
Not Subject to NDA
3.24.4. AT#MQCONN - Connect and Log in the MQTT Broker
This command performs the connection and login to the MQTT broker.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#MQCONN=<instanceNumber>,<clientID>,<userName>,<passWord>
Set command performs network connection (using parameters set with
#MQCFG) and sends the CONNECT packet to the MQTT broker.
Parameters:
Name
Type
Default
Description
<instanceNumber>
integer
N/A
selects the client instance. The
list of available clients is
obtained with AT#MQEN? or the
read command.
Value:
1÷maxClients
:
client instance range. To know
maxClients value use test
command
<clientID>
string
-
identifies each MQTT client that
connects to the MQTT broker.
Maximum length of <clientID> is
23.
<userName>
string
-
authentication and
authorization.
Maximum length of <userName>
is 512.
<passWord>
string
-
authentication and
authorization.
Maximum length of <passWord>
is 512.