Telit Wireless Solutions ME310G1 - Ftpeasy; AT#FTPAPP - FTP Append

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 727 of 1039 2021-09-23
Not Subject to NDA
FTPEasy
3.16.1. AT#FTPAPP - FTP Append
This command is used to append data to an already existing file via FTP during an FTP
session.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#FTPAPP=<fileName>[,<connMode>]
Set command, issued during an FTP connection, opens a data connection
and append data to existing <fileName> file.
If the data connection succeeds, a CONNECT indication is sent, afterward
a NO CARRIER indication is sent when the socket is closed.
Parameters:
Name
Type
Default
Description
<fileName>
string
-
the file name
<connMode>
integer
0
the connection mode
Values:
0
:
online mode
1
:
command mode
If <connMode> is set to 1, the data connection is opened, the device
remains in command mode and the OK result code is displayed
(instead of CONNECT).
Use the escape sequence +++ to close the data connection.