Telit Wireless Solutions ME310G1 - Page 790

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 790 of 1039 2021-09-23
Not Subject to NDA
If the data are not present or the #HTTPRING <httpStatusCode>
parameter has value 0, an error code is reported.
AT#HTTPRCV=?
Test command reports the supported range of values for <profId> and
<maxByte> parameters in the format:
# HTTPRCV: (list of supported <profId>s,<maxByte>)