MOVL P,ACC
6-212
MOVL P,ACC Load P From the Accumulator
SYNTAX OPTIONS OPCODE OBJMODE RPT CYC
MOVL P,ACC 1111 1111 0101 1010 X − 1
Operands P Product register
ACC Accumulator register
Description Load the P register with the content of the ACC register:
P = ACC;
Flags and
Modes
None
Repeat This instruction is not repeatable. If this instruction follows the RPT
instruction, it resets the repeat counter (RPTC) and executes only once.
Example
Calculate the 32-bit value: VarC = abs(VarA) + abs(VarB)
MOVL ACC,@VarA ; Load ACC with contents of VarA
ABS ACC ; Take absolute value of VarA
MOVL P,ACC ; Temp save ACC in P register
MOVL ACC,@VarB ; Load ACC with contents of VarB
ABS ACC ; Take absolute value of VarB
ADDL ACC,@P ; Add contents of P to ACC
MOVL @VarC,ACC ; Store result into VarC