EasyManua.ls Logo

Texas Instruments TMS320C28x - Page 392

Texas Instruments TMS320C28x
695 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MPYB ACC,T,#8bit
6-235
MPYB ACC,T,#8bit Multiply by 8-bit Constant
SYNTAX OPTIONS OPCODE OBJMODE RPT CYC
MPYB ACC,T,#8bit 0011 0101 CCCC CCCC X 1
Operands ACC Accumulator register
T Multiplicand register
#8bit 8-bit immediate constant value
Description Multiply the signed 16-bit content of the T register by the unsigned 8-bit
constant value zero extended and store the result in the ACC register:
ACC = signed T * 0:8bit
Flags and
Modes
Z After the operation, the Z flag is set if the ACC is zero, else Z is cleared.
N After the operation, the N flag is set if bit 31 of the ACC is 1, else N is
cleared.
Repeat This instruction is not repeatable. If this instruction follows the RPT
instruction, it resets the repeat counter (RPTC) and executes only once.
Example
; Calculate signed using 16-bit multiply:
; Y32 = Y32 + (X16 * 5)
MOV T,@X16 ; T = X16
MPYB ACC,T,#5 ; ACC = T * 5
ADDL @Y32,ACC ; Y32 = Y32 + ACC

Table of Contents

Related product manuals