POP T:ST0
6-279
POP T:ST0 Pop Top of Stack to T and ST0
SYNTAX OPTIONS OPCODE OBJMODE RPT CYC
POP T:ST0 0111 0110 0001 0101 X − 1
Operands T:ST0 The upper 16-bits of the multiplicand register and status register 0
Description Predecrement SP by 2. Load ST0 with the value pointed to by SP and load T
with the value pointed to by SP+1. The low 16 bits of the XT Register (TL) are
left unchanged:
SP −= 2;
T = [SP];
ST0 = [SP+1];
TL = unchanged;
Flags and
Modes
None
Repeat This instruction is not repeatable. If this instruction follows the RPT
instruction, it resets the repeat counter (RPTC) and executes only once.
To Next Page
Loading...
Need help?
General
