PUSH ST1
6-295
PUSH ST1 Push ST1 Onto Stack
SYNTAX OPTIONS OPCODE OBJMODE RPT CYC
PUSH ST1 0111 0110 0000 1000 X − 1
Operands ST1 Status register 1
Description Push the 16-bit contents of ST1 onto the stack pointed to by SP.
Post-increment SP by 1:
[SP] = ST1;
SP += 1;
Flags and
Modes
None
Repeat This instruction is not repeatable. If this instruction follows the RPT
instruction, it resets the repeat counter (RPTC) and executes only once.
To Next Page
Loading...