Texas Instruments TMS320C28x User Manual

Status Register (ST0)
2-22
Table 2−6. Instructions Affected by V flag (Continued)
Instruction Description
ADDUL P,loc32 V = 1 on signed overflow
B 16bitOff,COND V = 0 if tested
BF 16bitOff,COND V = 0 if tested
DEC loc16 V = 1 on signed overflow
DMAC ACC:P,loc32,*XAR7/++ V = 1 on signed overflow
IMACL P,loc32,*XAR7/++ V = 1 on signed overflow
IMPYAL P,XT,loc32 V = 1 on signed overflow
IMPYSL P,XT,loc32 V = 1 on signed overflow
INC loc16 V = 1 on signed overflow
MAC P,loc16,*XAR7/++ V = 1 on signed overflow
MAC P,loc16,0:pma V = 1 on signed overflow
MAX AX,loc16 if((AX − [loc16]) > 0) V = 1
MAXL ACC,loc32 if((ACC − [loc32]) > 0) V = 1
MIN AX,loc16 if((AX − [loc16]) < 0) V = 1
MINL ACC,loc32 if((ACC − [loc32]) < 0) V = 1
MOV loc16,AX,COND V = 0 if tested
MOVA T,loc16 V = 1 on signed overflow
MOVAD T,loc16 V = 1 on signed overflow
MOVB loc16,#8bit,COND V = 0 if tested
MOVL loc32,ACC,COND V = 0 if tested
MOVS T,loc16 V = 1 on signed overflow
MPYA P,loc16,#16bit V = 1 on signed overflow
MPYA P,T,loc16 V = 1 on signed overflow
MPYS P,T,loc16 V = 1 on signed overflow
NEG ACC if(ACC == 0x8000 0000) V = 1
NEG AX if(AX == 0x8000) V = 1
NEG64 ACC:P if(ACC:P == 0x80....00) V = 1

Texas Instruments TMS320C28x Specifications

General

Brand	Texas Instruments
Model	TMS320C28x
Category	Processor
Language	English