Texas Instruments TMS320F2837 D Series Workshop Guide And Lab Manual

TI Support Resources
TMS320F2837xD Microcontroller Workshop - Support Resources 13 - 5
drivers and support software, as well as system application examples. C2000Ware provides the
needed resources for development and evaluation. It can be downloaded from the TI website.
C2000 Experimenter’s Kit
C2000 Experimenter Kit
 Experimenter Kits include
 controlCARD
 USB docking station
 C2000 applications software with
example code and full hardware
details available in C2000Ware
 Code Composer Studio (download)
 Docking station features
 Access to controlCARD signals
 Breadboard areas
 On-board USB JTAG debug probe
 JTAG debug probe not required

Available through TI authorized
distributors and the TI store
 Part Number:
 TMDSDOCK28379D
 TMDSDOCK28069
 TMDSDOCK28035
 TMDSDOCK28027
 TMDSDOCK28335
 TMDSDOCK2808
 TMDSDOCKH52C1
JTAG debug probe required for:
 TMDSDOCK28343
 TMDSDOCK28346-168
The C2000 Experimenter Kits is a tool for device exploration and initial prototyping. These kits
are complete, open source, evaluation and development tools where the user can modify both the
hardware and software to best fit their needs.
The various Experimenter’s Kits shown on this slide include a specific controlCARD and Docking
Station. The docking station provides access to all of the controlCARD signals with two
prototyping breadboard areas and header pins, allowing for development of custom solutions.
Most have on-board USB JTAG emulation capabilities and no external debug probe or power
supply is required. However, where noted, the kits based on a DIMM-168 controlCARD include a
5-volt power supply and require an external JTAG debug probe.

Texas Instruments TMS320F2837 D Series Specifications

General

Brand	Texas Instruments
Model	TMS320F2837 D Series
Category	Microcontrollers
Language	English