Texas Instruments TMS320F2837 D Series

Reset and Boot Process
4 - 10 TMS320F2837xD Microcontroller Workshop - Reset and Interrupts
Peripheral Software Reset Registers
Peripheral Software Reset Registers
Register PeripheralName
SOFTPRES0 CPU1_CLA1, CPU2_CLA1
SOFTPRES1 EMIF1, EMIF2
SOFTPRES2 EPWM1, EPWM2, EPWM3, EPWM4, EPWM5, EPWM6, EPWM7, EPWM8, EPWM9, EPWM10, EPWM11, EPWM12
SOFTPRES3 ECAP1, ECAP2, ECAP3, ECAP4, ECAP5, ECAP6
SOFTPRES4 EQEP1, EQEP2, EQEP3
SOFTPRES6 SD1, SD2
SOFTPRES7 SCI_A, SCI_B, SCI_C, SCI_D
SOFTPRES8 SPI_A, SPI_B, SPI_C
SOFTPRES9 I2C_A, I2C_B
SOFTPRES11 McBSP_A, McBSP_B, USB_A
SOFTPRES13 ADC_A, ADC_B, ADC_C, ADC_D
SOFTPRES14 CMPSS1, CMPSS2, CMPSS3, CMPSS4, CMPSS5, CMPSS6, CMPSS7, CMPSS8
SOFTPRES16 DAC_A, DAC_B, DAC_C
DevCfgRegs.SOFTPRESx.bit.PeripheralName = 1
0 = controlled by normal CPU reset (default) 1 = reset peripheral
Peripheral Software
Reset Signal
Peripheral
The peripheral software reset register contains the reset bit for each peripheral.