Texas Instruments TMS320F2837 D Series Workshop Guide And Lab Manual

Creating a Linker Command File
TMS320F2837xD Microcontroller Workshop - Programming Development Environment 2 - 17
The linker will gather all the code sections from all the files being linked together. Similarly, it will
combine all ‘like’ sections.
Beginning with the first section listed, the linker will place it into the specified memory segment.
Summary: Linker Command File
The linker command file (.cmd) contains the inputs — commands — for the linker. This
information is summarized below:
Linker Command File Summary
 Memory Map Description
Name
Location
Size
 Sections Description
Directs software sections into named
memory regions
Allows per-file discrimination
Allows separate load/run locations

Texas Instruments TMS320F2837 D Series Specifications

General

Brand	Texas Instruments
Model	TMS320F2837 D Series
Category	Microcontrollers
Language	English