TOHATSU BFT75A - Page 563

19-26
dummyheaddummyhead
CONTROLS
Open the harness band clip [1] that clamps tube A [2].
Disconnect all the combination switch connectors [3].
Disconnect the two warning buzzer connectors [4].
Disconnect all the indicator light connectors [1].
Remove the indicator light [2] from the tiller handle by
pushing the retaining tabs [3] on the right and left sides
to the indicator light as shown.
[1]
[2]
[3]
[4]
[1]
[2]
[3]
[3]