TOHATSU BFT75A - Page 71

2-52
dummyheaddummyhead
SERVICE INFORMATION
TUBE CLIP 65
Install with the opening
facing up and align the
left edge with the right
edge of the paint mark
FUEL TUBE CLAMP B
FUEL TUBE C
AIR VENT
TUBE C
FUEL LINE
FUEL HOSE
PAINT MARK
WATER TUBE B
Install with the opening
facing out.
FUEL TUBE CLAMP B
FUEL TUBE D
AIR VENT
TUBE A
TUBE CLAMP
D29.0
OIL TUBE
TUBE CLAMP
TUBE CLIP 65
WATER TUBE A
TUBE
CLIP B10
TUBE CLIP
B12
HOSE CLIP
FUEL TUBE
CLAMP A
• Clamp water tube B and the fuel hose so they
are horizontal.
• Align the left edge with the right edge of the
paint mark.
TUBE CLAMP
Install with the opening
facing the cylinder block
side.
FUEL TUBE CLAMP B
PAINT
MARK
AIR VENT TUBE C