Topcon KR-1W - Page 105

103
DISPLAYING THE MEASUREMENT RESULT
Corneal Astigmatism:
• In the following cases, the character color is changed based on the set threshold value of
corneal astigmatism:
• When the measurement value is within the set value range (Å} range)
• When the measurement value is outside the set value range (Å} range)
The threshold value can be set between 0.00 and 100.00 in 0.01 unit.
Before shipment, the default setting is "1.5."
1 On the SETTINGS screen, tap the of the set item display "Corneal
Astig." of "DISPLAY."
2 Enter the value by the ten-key display of the .
3 Setting is complete by pressing the .
Set Condition button
Setting Change butto
n
OK button