Topcon KR-1W - Page 160

158
FUNCTION SETTING USING SETTINGS SCREEN
SETTING RMS THRESHOLD 2 (6mm) (THRESHOLD 1 < THRESHOLD 2)
Threshold 2 of RMS (6mm) in the IOL Selection map is set.
Setting is available with the increment of 0.01 from 0.00 to 100.00.
The default setting is 1.00.
1 Tap the in the "Threshold 2 of RMS (6mm)" in the setting item
"Display Setting".
2 With the numeric keypad of the , input numbers.
3 Press to complete the setting.
RMSDIGITS
RMS digits can be selected from "2 digtis" and "3 digits".
The default setting is "3 digits".
1 Tap the in the "RMS digits" in the setting item "Display Setting".
2 Tap the to select the desired digits.
3 Setting is complete.
SWITCHING OF A RIGHT AND LEFT EYE DISPLAY
Display of a right/left eye can be selected from "R/L" and "OD/OS".
The default setting is "R/L".
1 Tap the in the "Switching of a right and left eye" in the setting item
"Display Setting".
2 Tap the to select the desired display.
3 Setting is complete.
R/L : Right (a right eye) Left (a left eye)
OD/OS : Oculus Dexter (a right eye) Oculus Sinister (a left eye)
Set Condition button
Setting Change button
OK button
Set Condition button
Setting Change butto
n
Set Condition button
Setting Change butto
n