Topcon KR-1W - Page 166

164
FUNCTION SETTING USING SETTINGS SCREEN
PRINTING SE VALUES (S.E. DATA)
SE values can be printed. Before shipment, the default setting is "ON" (Print SE values).
1 Tap the of the set item display "S.E. Data" of "PRINT INT."
2 Tap the and select "ON" (Print SE values) or "OFF" (Do not print
SE values).
3 Setting is complete.
PRINTING PD VALUES (PD DATA)
PD values (cornea peak distance) can be printed. Before shipment, the default setting is "ON"
(Print PD values).
1 Tap the of the set item display "PD Data" of "PRINT INT."
2 Tap the and select "ON" (Print PD values) or "OFF" (Do not print
PD values).
3 Setting is complete.
Set Condition button
Setting Change butto
n
Set Condition button
Setting Change butto
n