Topcon TRK-3 OMNIA - Page 111

109
SETTING FUNCTIONS ON SETUP SCREEN
Printer(R/K)1
Printer(R/K)2
Printer(R/K)3
Descriptions Options Details
Initial value
(Region)
A C E D J G
Preset (All) Execution
Print format of preset is All.
Refer to page 24 for details on the presetting.
Preset (Avg) Execution
Print format of preset is Avg.
Refer to page 24 for details on the presetting.
Preset (Classic) Execution
Print format of preset is Classic.
Refer to page 24 for details on the presetting.
Print order
R/L
Both REF and KRT measurement value
are printed in order of right eye and left eye.
DATA Measurement values are printed in terms of REF or KRT. 
Include error data
OFF “Error” data is not printed. 
ON “Error” data is printed.
VD
OFF VD (Vertex distance) value is not printed.
ON VD (Vertex distance) value is printed. 
Cylinder sign
OFF Cylinder sign is not printed.
ON Cylinder sign is printed. 
REF format
ALL All the measurement value is printed. 
AVG Only averaged is printed.
Descriptions Options Details
Initial value
(Region)
A C E D J G
S.E.
OFF S.E.is not printed.
ON S.E. is printed. 
PD
OFF PD (pupil distance) value is not printed.
ON PD (pupil distance) value is printed. 
KRT print order
D/mm
KRT data is printed as follows,
D (corneal refractive power)/mm (corneal curvature).

mm/D
KRT data is printed as follows,
mm (corneal curvature)/D (corneal refractive power).
KRT format
ALL All the measurement value is printed. 
AVE Only the average values are printed.
KRT style
HV Kerato style in print out is HV (horizontal/vertical).
R1R2 Kerato style in print out is R1R2 (flat/steep meridian). 
KRT print format
HV KRT measurement result is printed in HV (horizontal/vertical).
R1R2 KRT measurement result is printed in R1 R2 (flat/steep meridian). 
KRT average
OFF KRT average value is not printed.
ON KRT average value is printed. 
Descriptions Options Details
Initial value
(Region)
A C E D J G
R1-R2
OFF
Does not print the difference in refraction between R1 and R2 and
its axial direction.
ON
Prints the difference in refraction between R1 and R2 and its axial
direction.

Cornea diameter
OFF Does not print the cornea diameter.
ON Print the cornea diameter. 