Topcon TRK-3 OMNIA - Page 112

110
SETTING FUNCTIONS ON SETUP SCREEN
Printer(REF)
Printer(KRT)
Printer(T/P)
Descriptions Options Details
Initial value
(Region)
A C E D J G
VD
OFF VD (Vertex distance) value is not printed.
ON VD (Vertex distance) value is printed. 
Cylinder sign
OFF Cylinder sign is not printed.
ON Cylinder sign is printed. 
REF format
ALL All the measurement value is printed. 
AVG Only average is printed.
S.E.
OFF S.E.is not printed.
ON S.E. is printed. 
PD
OFF PD (pupil distance) value is not printed.
ON PD (pupil distance) value is printed. 
Descriptions Options Details
Initial value
(Region)
A C E D J G
KRT print order
D/mm
KRT data is printed as follows,
D (corneal refractive power)/mm (corneal curvature).

mm/D
KRT data is printed as follows,
mm (corneal curvature)/D (corneal refractive power).
KRT format
ALL All the measurement value is printed. 
AVE Only the average values are printed.
KRT style
HV Kerato style in print out is HV (horizontal/vertical).
R1R2 Kerato style in print out is R1R2 (flat/steep meridian). 
KRT print format
HV KRT measurement result is printed in HV (horizontal/vertical).
R1R2 KRT measurement result is printed in R1 R2 (flat/steep meridian). 
KRT average
OFF KRT average value is not printed.
ON KRT average value is printed. 
R1-R2
OFF
Does not print the difference in refraction between R1 and R2 and
its axial direction.
ON
Prints the difference in refraction between R1 and R2 and its axial
direction.

Cornea diameter
OFF Cornea diameter is not printed.
ON Cornea diameter is printed. 
Descriptions Options Details
Initial value
(Region)
A C E D J G
Printer order
R/L
The order is right eye and left eye regardless of the TONO
measurement value and PACHY measurement value.
DATA
TONO measurement value and PACHY
measurement value are separately printed.
SIMPLE Print in the SIMPLE format. 
mmHg Display on hPa
OFF mmHg is not printed on hPa.
ON mmHg is printed on hPa. 
IOP ADJ Formula
OFF
Center CCT Base and Adjustment Coefficient for
IOP ADJ formula are not printed.
ON
Center CCT Base and Adjustment Coefficient for
IOP ADJ formula are printed.

Measure correction
OFF The corrected intraocular pressure value is not printed.
ON The corrected intraocular pressure value is printed. 