Topcon TRK-3 OMNIA

To Next Page

To Previous Page

OPTIONAL OPERATIONS

Measurement is performed and measurement values are displayed on the control panel.

NOTE

If you press and hold the MEASUREMENT switch of the control lever in the

manual mode of REF/ KRT, perform the measurement once, over and over

again.

Main Page

Introduction3
Table of Contents5
Displays and Symbols for Safe Use8
Display8
Symbol8
General Safety Information10
How to Use this Manual14
General Maintenance Information14
User Maintenance14
Cleaning the Measuring Window14
Cleaning the Measuring Nozzle and Window Glass Inside the Measuring Nozzle14
Disclaimers14
Positions of Warning and Caution Indications15
Standard Accessories16
Components17
Component Names17
Composition of Parts Which Contact the Human Body17
Operation Method of Control Panel18
Control Panel Components (in Ref/Krt Measurement Mode)18
Measurement Screen18
Monitor Screen20
Control Panel Components (in Tono/Pachy Measurement Mode)21
Manual Mode21
Monitor Screen23
Printer Output (in Ref/Krt Measurement Mode)24
Printout Format Setting26
Printer Output (in Tono/Pachy Measurement Mode)27
Preparations30
Unpacking Procedure30
Installation32
Connecting Power Cord33
Connecting External I/O Terminals34
Data Output34
Data Input35
Printer Paper Setting36
Supplying the Chinrest Tissue37
Transporting of the Instrument37
Region Selection of the Initial Startup38
Restore Default Settings39
Recovery from Power Save Status39
Adjusting the Control Panel Position40
Basic Operations41
Operation Flow Chart41
Preparation before Measurement42
Turning on the Instrument42
Brightness Adjustment of Control Panel43
Setting the Auto Contact Avoidance Function44
Selecting the Measurement Mode45
Checking the Measuring Nozzle46
Air Check47
Setting the Patient ID49
Setting the Physician ID50
Setting the Patient ID (Using Mwl)51
Patient Positioning53
Setting the Safety Stopper55
Measurement in Ref/Krt Tono/Pachy Continuous Measurement Mode58
Checking the Measurement Mode -Ref/Krt Tono/Pachy Continuous Measurement Mode58
Setting the Auto Mode in Ref/Krt59
Alignment and Measurement in Ref/Krt59
Setting the Auto Mode in Tono/Pachy62
Setting the Measuring Range63
Alignment and Measurement in Tono/Pachy64
Displaying Measurement Values66
Print-Out of Measurement Values67
End of Measurement67
Clearing Measurement Values68
Displaying All Measurement Data69
Ref Measurement Data70
Krt Measurement Data71
Tono Measurement Data72
Pachy Measurement Data73
Operation after Use74
Optional Operations75
DISPLAYING the PATIENT ID (PATIENT No.) or OPERATOR ID75
One Touch Operation for Mode Change75
Manual Mode in Ref/Krt76
Setting Manual Mode76
Alignment and Measurement76
Displaying Measurement Values79
Measurement of Cornea Diameter (in Ref/Krt)80
Manual Mode in Tono/Pachy83
Setting the Manual Mode83
Setting the Measuring Range83
Alignment and Measurement84
Displaying Measurement Values87
Iol Mode in Tono/Pachy88
Setting the Iol Mode88
Setting the Iol Led Brightness88
One-Eye Measurement Mode89
To Measure Only the Left Eye89
To Measure Only the Right Eye90
Input Using Usb90
Output Using Lan90
Operating the Control Lever91
Manual Mode in Ref/Krt92
Alignment and Measurement93
Manual Mode in Tono/Pachy96
Setting the Measuring Range96
Alignment and Measurement97
Adjusting the Height of the Chinrest by Wide-Angle Anterior Observation Image100
Setting Functions on Setup Screen101
Operating the Setup Screen101
Preparatons for Setting101
Outline of Setup Screen Operations102
Pull-Down Menu103
Returning to the Measurement Screen104
List of Setup Items105
Maintenance115
Maintenance Checkups115
User Maintenance Items115
Manufacturer Maintenance Items115
Inspection of Measurement Accuracy116
Maintenance after Use116
Attach the Intraocular Pressure Measuring Window Cap116
How to Clean this Instrument117
Cleaning the Components that Come into Contact with the Patient/Operator117
Cleaning the Instrument Cover117
Cleaning the Control Panel117
Cleaning the Measuring Window118
Ordering Consumable Items120
Replacing the Chinrest Tissue120
Device Log Information121
Troubleshooting122
Message List122
Air Check129
Trouble-Shooting Operations129
Printer Paper Jam130
Specifications and Performance131
General Information on Usage and Maintenance132
Intended Patient Population132
Intended User Profile132
Environmental Conditions of Use132
Storage, Usage Period132
Transport Conditions132
Electric Rating133
Dimensions and Weight133
System Classification133
Operation Principle134
Disposal135
Patient Environment136
Requirements for the External Device137
It Network Environment137
Input/Output Interface Specifications138
Specifications of Isolation Transformer to be Connected138
Electromagnetic Compatibility139
Safety of Laser Products142
Reference Material143
About the Barcode and the Qr Code of the Back Cover143
Trk-3 Omnia Software License Terms144
Limited Warranty145
Governing Law146
Entire Agreement146
Open Source Software146

Topcon TRK-3 OMNIA - Page 95

Table of Contents

Related product manuals