92
OPTIONAL OPERATIONS
If the instrument is too close to the patient's eye in comparison with the optimal alignment position, Z
alignment red bars appear on the upper side of the center horizontal bar (light blue). If it is too far, Z
alignment green bars appear on the lower side of the
center horizontal bar (light blue). The number of
bars are reduced accordingly as the optimal alignment reference position comes closer. If the instrument
is completely off the alignment range, Z alignment bars and horizontal bar (light blue) do not appear.
5 When the red or green Z alignment bars disappear and the alignment mark is turned green, the
automatic measurement is performed or press the MEASUREMENT switch.
* When “Auto Shoot” in “Function(Common)2” on the Setup screen is set to ON, operate the control
lever to automatically start measurement once the alignment is complete. Refer to “Auto Shoot” on
page 105.
Too close
Too far
Off the alignment range
To Next Page
Loading...
