Toshiba B-FV4 Series User Manual

3. REPLACING THE IMPORTANT PARTS EO18-33030
3.3 Replacing the Parts for B-FV4D-GH
3-43
7. Remove the 2 springs and then take off the roller.
8. Use a Phillips screwdriver to remove the 1 screw and then take off the peel-off sensor.
9. Replace the peel-off unit or the peel-off sensor with a new one and then reassemble it in the reverse
order of removal.
Roller
Spring Spring
Peel-off Sensor
Screw

Toshiba B-FV4 Series Specifications

General

Resolution	203 dpi
Print Method	Thermal Transfer / Direct Thermal
2D Codes	Data Matrix, PDF417, QR Code, Maxi Code
Operating Temperature	5 – 40 °C
Storage Temperature	-20 – 60 °C
Power Supply	100-240 VAC, 50/60 Hz
Interfaces	USB, Serial (RS-232)
Media Width	25.4 – 112 mm