Toshiba B-FV4 Series User Manual

7. B-FV Setting Tool EO18-33030
7.6 Working with B-FV Setting Tool (V1.0.34)
7-120
Download
Download is used to download files to your printer. Tabs in Download are related to the emulation
language you choose. Remember that you need to set up a network connection before you use the
LAN or Multi-LAN port for the data transfer. For further details, see Setting up LAN connection,
Setting up IPv6 connection and Setting up WLAN connection.
Firmware
The Firmware tab displays in all emulation modes. It is used to update firmware. For information
about update firmware in B-FV Setting Tool, see Updating firmware in B-FV Setting Tool.
Font
The Font tab only displays in TPCL mode. It accepts TrueType fonts. You can send fonts to your
printer and store them in your printer’s flash memory.
To send fonts to your printer:
1. Right-click in the blank Font list and click Add.
Note For Type 3 models, the Send function is not supported in Firmware.

Toshiba B-FV4 Series Specifications

General

Resolution	203 dpi
Print Method	Thermal Transfer / Direct Thermal
2D Codes	Data Matrix, PDF417, QR Code, Maxi Code
Operating Temperature	5 – 40 °C
Storage Temperature	-20 – 60 °C
Power Supply	100-240 VAC, 50/60 Hz
Interfaces	USB, Serial (RS-232)
Media Width	25.4 – 112 mm