6
© 2008-2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5520C/6520C/6530C
ERROR CODE and TROUBLESHOOTING
6 - 5
E510 Paper transport jam
(ADU section)
Jam not reaching the ADU entrance sensor: The
paper does not reach the ADU entrance sensor
after it is switchbacked in the exit section.
P. 6 - 4 0
E511 ADU misfeeding (Paper not reaching the ADU
transport sensor-1)
P. 6 - 4 0
E540 ADU misfeeding (Paper not reaching the ADU feed
sensor): Paper does not reach the duplexing unit
path exit sensor after it has passed the duplexing
unit path entrance sensor.
P. 6 - 4 1
E550 Other paper jam Paper remaining jam on the transport path: The
paper is remaining on the transport path when
printing is finished (caused by a multiple paper
feeding).
P. 6 - 4 7
E570 Paper transport jam Jam not reaching the bridge unit. P. 6-41
E580 Stop jam at the bridge unit P. 6-42
E590 Jam not reaching the upper paper exit sensor P. 6-29
E5A0 Stop jam at the upper paper exit sensor P. 6-29
Error code Classification Contents Troubleshooting
To Next Page
Loading...
