EasyManua.ls Logo

Toshiba Strata CTX28 - Page 154

Toshiba Strata CTX28
592 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Station
ISDN
5-40 Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04
23 TGAC Override Enable TGAC Override.
Possible values: Enable or Disable (default)
24 Change System
Speed
Enable System Speed Dial changing permission.
Possible values: Enable or Disable (default)
25 Network COS Enter the Network COS value. If a selection is not made, previously written data in this
field is erased.
Possible values: 1~32 (default = 1)
26 DN2~32 DN8 Add a DN to this BRI Station. When a DN is entered into one of the seven available
fields, default data as defined in 217 ISDN Station Data is applied to the DNs. If a
selection is not made, any previously written data in this field is erased.
Possible values: Up to 5 ASCII characters (default = no value)
33 Auto OCA Enable OCA to occur automatically when making a call to a busy station that allows calls
to be received.
Possible values: Enable (default) or Disable
34 Originate OCA Enable this station to make OCA calls to other stations.
Possible values: Enable or Disable (default)
38 MW/DND Enable: When this station goes off hook, the station will receive stuttered dial tone when
it has a message waiting indication; and the station will receive a busy tone burst before
dial tone when in the DND mode.
Disable: This station will receive normal dial tone when it has a message waiting or
when it is in the DND mode.
39 Tenant Number Enter the Tenant number to which this PDN should be assigned. (This feature is
available with CTX R2.2 or higher and CTX WinAdmin R2.2G.0 and higher.)
Possible values: 1~8
40 Auto-Campon to
PDN
This feature allows automatic camp-on to a PDN, even when it is busy and called by a
CO line. If Automatic Camp-on to PDN is enabled, a call to a PDN can camp on even if
the CO line group has auto-camp on disabled in Program 304-17.
Possible values: Enable: Allow auto camp-on to PDN
Disable: No auto camp-on to PDN
41 LCR PDN Code Enter the number of digits that determine when to send the LCR PDN code. The PDN
code is registered in the LCR Modified Digits table.
Possible values: 3 or 4 digits.
Table 5-5 BRI Bearer Capability of ISDN
Bearer Services
Bellcore
Natl ISDN
ETSI TTC
Circuit Mode
Speech X X X
3.1kHz Audio X X X
7kHz Audio X X
Unrestricted Digital Information
64 kbps X X X
Rate adaptation
from 56 kbps
X
2x64 X X
FIELD DESCRIPTION

Table of Contents

Other manuals for Toshiba Strata CTX28

Related product manuals