Trunks
Trunk DID/DNIS Setup Wizard
Strata CTX Programming - Part 2: CTX WinAdmin Programming 6/04 6-37
Trunks
2. (Optional) Click DID/DNIS Table View to view existing DID/DNIS assignments. For more details, see
“DID/DNIS Table View” on page 6-21.
3. When finished, click Next.
Step 3: Assign DID/DNIS Number Audio Destinations for ILG 2
1. From the Step 3: 309 Assign DID/DNIS Number
Audio Destinations for ILG 2 screen (shown right),
set the DID/DNIS Number range.
Note This step enables you to assign the ringing
destinations for all DID/DNIS numbers in the
selected ILG. This assignment applies only to
Voice (audio) calls—not to data calls.
2. Specify the range of DID/DNIS numbers for which
ringing assignments should be made. Use the First
Number/Last Number drop-down arrows.
3. Fill in the appropriate fields on this screen (see
field descriptions below).
4. (Optional) Click DID/DNIS Table View to view existing DID/DNIS assignments. For more details, see
“DID/DNIS Table View” on page 6-21.
5. After selecting DID/DNIS ringing destination assignments, click Submit to register them in the CTX
database.
6. After creating DID/DNIS ringing destinations, click Next to assign DID/DNIS Voice Mail ID codes.
These VM codes are optional and are only used if DID/DNIS numbers have unique VM boxes to “call
forward to” or “ring directly to”.
FIELD DESCRIPTION
GCO Key Group If a Group CO Key is selected, all selected DID/DNIS numbers will ring on telephones
that have this key.
Note This selection will override any GCO or Pool Key Group assignment made in
the Program 304, ILG assignments. Day/Day2/Night period assignments do
not apply, GCO or Pool Keys will ring in all periods.
Pool Key Group If a Pool Key Group is selected, all selected DID/DNIS numbers will ring on
telephones that have this key.
Note This selection will override any GCO or Pool Key Group assignment made in
the Program 304, ILG assignments. Day/Day2/Night period assignments do
not apply, GCO or Pool Keys will ring in all periods.
Set for Period DID/DNIS ringing assignments can be unique for each CTX time period: Day, Day2
and Night. Select the period(s) in which the destinations should ring. Then select the
destination type.
To Next Page
Loading...
