Strata CTX Programming Guidelines
Step 1: Use Default Auto-programming to Start Up
Strata CTX Programming - Part 1: Getting Started 6/04 1-7
Strata CTX
Programming
Table 1-10 IP-Trunk Information
Table 1-11 System Information
Program Description Settings
ILG
ILG Number 7
Kind of Trunk (Analog/ISDN) ISDN
Type of Trunk TIE
OLG
OLG Number 4
Kind of Trunk (Analog/ISDN) ISDN
Type of Trunk TIE
ISDN Trunk
CG Number
1: 1st BIPU
2: 2nd BIPU
3: 3rd BIPU
Type of Protocol IP
ILG 7
OLG 4
Voice Coding Procedure CODEC (G.711, G.729A) G.711
Index of Voice attribute table (1~256) 1
Parameter of voice attribute table -
Packet Interval: 20ms
Type of Jitter buffer: Fixed
Size of Jitter buffer: 1
Max Acceptable Delay: 1
Measure Time: 1000ms
Packet Loss Ratio: 5
Packet discard ratio: 5
D-ch Establish/Release D-ch Establish/Release D-ch Release by Call Released
Fast Connect Procedure - Apply
Negotiation Negotiation of H.245 Un-Apply
IP address for Node ID IP Address IP address
Item Description Settings
QoS Control
Priority Control by Diffserv.
IEEE802.1p
Diffserv: Disable
DS Field: 0
IEEE802.1p Disable
Priority: Voice (6)
To Next Page
Loading...
