Telephone Button Programming
100 Series Programs
13-26 Strata CTX Programming - Part 3: Telephone Button Programming 6/04
Table 13-12 Data Initialize Programs
Program
Number
Program Name Page #
500 System Call Forward Assignment 74
520 LCR Local Route Plan Assignment 82
521 LCR Route Plan Digit Analysis Assignment 83
522 LCR Exception Number Route Plans 83
523 LCR Route Plan Schedule Assignment 83
524 Route Table to Route Definition Assignment 84
525 LCR Route Definition Assignment 84
526 Modified Digits Table Assignment 84
527 LCR Holiday Table 84
529 LCR Route Plan Time Zone Assignment 85
530 DR LCR Screening Table Assignment 85
531 DR Screening Table for OLG 86
533 DR Level Table Assignment 86
534 DRL Exception Table Assignment 87
651 Private Routing Plan Analysis 91
653 Private Route Choice Table Assignment 91
654 Private Route Definition Table Assignment 92
655 Private Network Digit Modification Table Assignment 92
Table 13-13 Program 117
Button Sequence Value(s) Summary
117
Public Dial Plan Digit
,
+ROG
This command is used to prevent users from circumventing
Destination Restriction by sending tones directly to the PSTN before
DR analysis is complete. It defines the number of digits expected in
PSTN numbers beginning with identified sequences. For example, a
number starting with the toll prefix “1” would be expected to be 11
digits long. Calls will be cut through to the public network only after
the expected number of digits have been received.
117-00 Prefix Number
n,
+ROG
,
n = Up to 7 digits
(Wild Cards n and x)
The initial, identifying external digits. 1 to 7 digits may include wild
cards “x” and “n” where x = 0~9 and n = 2~9.
117-01 Digits to Follow
)%
, n1,
+ROG
,
+ROG
n1 = 1~64 The total number of digits in a number beginning with the Prefix
Number above.
To Next Page
Loading...
