Toshiba Strata CTX28 - Page 357

Telephone Button Programming
200 Series Programs
Strata CTX Programming - Part 3: Telephone Button Programming 6/04 13-33
Telephone Button
Programming
202-20 CESID
)% , n, +ROG
n = Up to 16 digits Enter the Caller Emergency Services Identification (CESID) for E911
calls.
202-21 Number Voice Calls
Allowed
)% , n, +ROG
n = 1. One
2. Two
Voice Call Allowed Number for Interface.
202-22 Service Tone
Permission
)% , n, +ROG
n = 1. Enable
2. Disable
Service Tone Permission.
202-23 TGAC Override
)% , n, +ROG
n = 1. Enable
2. Disable
TGAC Override.
202-24 Change System
Speed
)% , n, +ROG
n = 1. Enable
2. Disable
Permission to register System Speed Dial.
202-25 Network COS
)% , n, +ROG
n = 1~32 Network COS index.
202-26 Additional DN2
)% , n, +ROG
n = Up to 5 digits Additional DN2.
202-27 Additional DN3
)% , n, +ROG
n = Up to 5 digits Additional DN3.
202-28 Additional DN4
)% , n, +ROG
n = Up to 5 digits Additional DN4.
202-29 Additional DN5
)% , n, +ROG
n = Up to 5 digits Additional DN5.
202-30 Additional DN6
)% , n, +ROG
n = Up to 5 digits Additional DN6.
202-31 Additional DN7
)% , n, +ROG
n = Up to 5 digits Additional DN7.
202-32 Additional DN8
)% , n, +ROG
n = Up to 5 digits Additional DN8.
202-33 Auto OCA
)% , n, +ROG
n = 1. Enable
2. Disable
OCA occurs automatically when making a call to a busy station that
allows calls to be received.
202-34 Originate OCA
)% , n, +ROG
n = 1. Enable
2. Disable
The privilege to make OCA calls to other stations.
202-35 Station SpDial Bins
)% , n, +ROG
n = 1~100 (in intervals of 10) The number of station speed dial bins allocated to this station
(maximum=100).
202-38 MW Stutter Dial Tone
)% , n, +ROG , +ROG
n = 1. Enable
2. Disable
Enable: This station will receive stuttered dial tone when it has a
station-to-station or Voice Mail message waiting.
Disable: This station will receive normal dial tone when it has a a
station-to-station or Voice Mail message waiting.
202-39 Tenant Number
)% , n, +ROG , +ROG
n = 1~8 (default = 1) Enter the Tenant number to which this PDN should be assigned.
Table 13-14 Programs 200~202 (continued)
Button Sequence Value(s) Summary