Toshiba Strata CTX28 - Page 381

Telephone Button Programming
300 Series Programs
Strata CTX Programming - Part 3: Telephone Button Programming 6/04 13-57
Telephone Button
Programming
304-01 Group Type
)% , n, +ROG
n = 1. Analog (default)
2. ISDN
Select the ILG Type.
304-02 Trunk Type
)% , n, +ROG
n = 1. CO (default)
2. Tie
Select the Trunk Type.
304-03 Service Type
)% , n, +ROG
n = 1. DID
2. DIT (default)
Select CO Trunk Service Type.
304-04 Private Service Type
)% , n, +ROG
n = 1. Standard (default)
2. QSIG
Select the Tie Trunk Service Type. This field is required when Trunk
Type is set to Tie.
304-05 GCO Key Number
)% , n, +ROG
n = 0~32 (CTX100)
0~50 (CTX670 Basic)
0~128 (CTX670 Exp.)
(default = 0)
Select ILG GCO Key Group for DIT mode (see Trunk Type above).
The same GCO cannot belong to different ILGs.
304-06 Pooled Key Number
)% , n, +ROG
n = 0~32 (CTX100)
0~50 (CTX670 Basic)
0~128 (CTX670 Exp.)
(default = 0)
Select ILG Pooled Line Key Group for DIT mode. The same Pooled
Line Group cannot belong to different ILGs.
0~128 (CTX670), 0~32 (CTX100) (default = 0)
304-07 COS
)% , n, 6SNU , n, 
6SNU
, n, +ROG
n = 1~32
(default = 1)
Select Day 1, Day 2 and Night Values.
304-08 DRL
)% , n, 6SNU , n, 
6SNU
, n, +ROG
n = 1~16
(default = 1)
Select Day 1, Day 2 and Night Values.
304-09 FRL
)% , n, 6SNU , n, 
6SNU
, n, +ROG
n = 1~16
(default = 1)
Select Day 1, Day 2 and Night Values.
304-10 QPL
)% Q 6SNU Q 
6SNU Q +ROG
n = 1~16
(default = 1)
Select Day 1, Day 2 and Night Values.
304-11 DID Digits
)% , n, +ROG
n = 0~7
(default = 0)
Select number of DID digits received from CO.
304-12 Speech/3.1 KHz
)% , n, +ROG
n = 1. Audio (default)
2. Speech
Select Bearer Capability 3.1 KHz Audio or Speech.
304-13 Ringing Timer Delay 1
)% , n, +ROG
n = 0~60 sec.
(default = 12)
Select time to ring the Delay 1 destination.
304-14 Ringing Timer Delay 2
)% , n, +ROG
n = 0~60 sec.
(default = 24)
Select time to ring the Delay 2 destination.
304-15 Interdigit 1 Timer
)% , n, +ROG
n = 1~180 sec.
(default = 15)
Select Interdigit 1 timer value.
304-16 Interdigit 2 Timer
)% , n, +ROG
n = 1~180 sec.
(default = 5)
Select Interdigit 2 timer value.
304-17 Auto Camp-on
)% , n, +ROG
n = 1. Enable (default)
2. Disable
Select in box to toggle Automatic Camp-on.
304-18 Calling Number ID
)% , n, +ROG
n = 1. User Provided
(default)
2. Network Provided
Select Calling Number Identification source.
Table 13-28 Programs 303~315 (continued)
Button Sequence Value(s) Summary