Telephone Button Programming
300 Series Programs
Strata CTX Programming - Part 3: Telephone Button Programming 6/04 13-65
Telephone Button
Programming
315-04 Receive PAD
)%
, n,
+ROG
,
+ROG
n = 1. None
2. Plus 6 dB
3. Plus 3 dB
4. Zero dB (default)
5. Minus 3 dB
6. Minus 6 dB
7. Minus 9 dB
8. Minus 12 dB
9. Minus 15 dB
Select the Receive PAD values.
315-05 Send Pad
)%
, n,
+ROG
n = 1. None
2. Plus 6 dB
3. Plus 3 dB
4. Zero dB (default)
5. Minus 3 dB
6. Minus 6 dB
7. Minus 9 dB
8. Minus 12 dB
9. Minus 15 dB
Select the Send PAD values.
Table 13-29 Programs 316~317
Button Sequence Value(s) Summary
316
Shared D Channel
,
+ROG
The PRI Interface can be extended to include an additional PRI card
to expand the total number of channels to 47 on a Channel Group.
This second PRI may optionally offer a backup D channel.
316-00 Channel Group
n,
+ROG
n = 1~32 (CTX100)
1~48 (CTX670 Basic)
1~128 (CTX670 Exp.)
Channel Group Number.
316-01 Equipment Number
)%
, xxyyzz,
+ROG
xx =
yy =
zz =
xx = Cabinet 01, yy = 03,
05, or 07 and zz = Channel
01 is always used to assign
RPTU parameters
Enter the ISDN RPTU equipment number as xxyyzz:
Example: If the RPTU is installed in cabinet shelf 5, slot 3, enter
050301.
Cabinet numbers:
CTX100: Select 01 for Base and Expansion cabinet.
CTX670: Select 01 for Base and 02~07 respectively for each
Expansion cabinet.
Slot numbers:
CTX100: Select 01~04 for Base slots and 05~08 for Expansion slots.
CTX670: Select 01~08 for Base slots and 01~10 for Expansion slots..
or
xx = Cabinet 02~10,
yy = 01, 03, or 05 and
zz = Channel 01 is always
used to assign RPTU
parameters
316-02 Trunk ID
)%
, n,
+ROG
n = 0~126
(default = 1)
An identifier must be used as part of the addressing to communicate
with the PSTN which channel on which link is used the given call.
This identifier is assigned by the connected PSTN.
316-03 D Channel Provided
)%
, n,
+ROG
n = 1. D-Channel
2. No D-Channel (default)
If a backup ‘D’ Channel is to be used, it needs to be enabled.
316-04 Backup D Channel
Position
)%
, n,
+ROG
,
+ROG
n = 1~128
(default = 24)
Channel Group Number.
317
ISDN BRI Trunk
,
+ROG
The following program enables set up for ISDN related system
settings.
317-00 Channel Group
n,
+ROG
n = 1~32 (CTX100)
1~48 (CTX670 Basic)
1~128 (CTX670 Exp.)
Enter the BRI channel Group Number.
Table 13-28 Programs 303~315 (continued)
Button Sequence Value(s) Summary
To Next Page
Loading...
