Applications, Tips and Tricks
IPT1020-SD Telephone Network Settings
A-10 Strata CTX Programming - Part 4: Appendices 6/04
Viewing IPT1020-SD Terminal Information
1. Press
+
+
+
+ROG
(simultaneously).
2. Press
, then press
+ROG
.
3. Press
)%
to view IPT firmware version (application and boot versions, read only).
4. Press
)%
to view IPT MAC address (read only).
5. Go off-hook and hang up.
Initializing the IPT1020-SD (Optional)
CAUTION! If you initialize, the IP telephone network settings return to default.
1. Press
+
+
+
+ROG
(simultaneously).
2. Press
9RO
V
+
+ROG
.
3. Press
)%
to initialize the telephone’s IP network connection settings (LED On = initialize,
LED Off = don’t initialize). See “IPT-to-IP Network Connection Instructions”below for details.
4. Press
+ROG
again to complete the initialization process.
5. Go off-hook and hang up.
To Next Page
Loading...
