Toshiba Strata CTX28 - Page 470

System Error Codes
Station Programming Error Codes
B-8 Strata CTX Programming - Part 4: Appendices 6/04
206
33
)% The System Call Forward index entered is out of the range.
49
)%
)%
An invalid DN was selected. The entered PDN is not related
to this Phantom DN.
51 -
Phantom DN entered is invalid (the entered value is used as a
part of an existing extension number or numbering plan).
51
)%
)%
)%
An invalid DN was selected (the entered value is used as a
part of an existing extension number or numbering plan).
52 -
The Phantom DN entered conflicts with an existing DKT
extension.
52
)%
)%
The entered DN conflicts with an existing DKT extension, or
numbering plan, etc.
80
)%
A Phantom DN that does not exist in the system has been
selected.
207 33
)%
The feature key entered is not a “Single Touch Button”.
208
51
)%
An invalid DN was selected (the entered value is used as a
part of an existing extension number or numbering plan).
52
)% The entered DN conflicts with an existing numbering plan.
80
)%
The DN entered is an extension number that does not exist in
the system.
209
33
)%
The System Call Forward index entered is out of the range.
49
)%
If Hunt Method field is set to Distribute, the incoming
destination Pilot Number must be assigned.
50
)%
If Hunt Method is set to Distribute, Pilot Number must be
assigned.
51
)%
The entered value conflicts with an existing number or
numbering plan.
52
)% The entered value conflicts with an existing DKT extension.
80
)%
The designated Hunt Group number does not exist in the
system.
96
)%
The assigned Hunt Group number, exceeds the system
capacity.
210
51
)%
The entered DN does not exist in the system (The entered
value is used in an extension number or numbering plan).
52
)% The entered value is used in the numbering plan.
80
)% The entered Prime DN does not exist in the system.
96 -
The Pickup group number entered is out of the range for the
system's capacity.
211 80 -
The hunting group number entered (FB00) is a number that
does not exist in the system.
Program Code FB
Sub-
parameter
Error Descriptions