Toshiba Strata CTX28 - Page 469

System Error Codes
Station Programming Error Codes
Strata CTX Programming - Part 4: Appendices 6/04 B-7
System Error Codes
205
33 540 The door lock number entered is out of the range.
33 900 The application number entered is out of the range.
48
 Required parameter for each Feature Code is not entered.
49
)%
110 Two or more PhDNs with the same value are registered to
one extension.
49
)%
700
790
800
810
820
830
Only Feature Code(s) allowed for Attendant Console is
registered.
49
)%
610 Two or more DSSs with the same value are registered to one
extension.
49
)%
120
130
560
610
While assigning sub-parameters to a DN: A DN was selected
that does not exist in the system.
51
)%
The Primary DN entered conflicts with a value of an existing
numbering scheme.
51
110 The Primary DN entered conflicts with a value of an existing
numbering scheme.
51
)%
120
130
When assigning an Owner DN to a CO or GCO, the related
CO or GCO buttons are not assigned to the respective FB(s)
of the owner’s extension.
52
The Primary DN entered conflicts with a value of an existing
numbering scheme.
52
)%
110 The Secondary/PhDN entered is already used in ISDN
extenstion(s), etc.
52
)%
120
130
The CO or GCO Owner DN entered does not exist.
80
)% The PrimeDN does not exist in the system.
82
 The sub-parameter values assigned to the FB are invalid.
82 120 The line number entered does not exist.
96

110
130
140
The maximum allowable value for GCO, POOL, or PhDN has
been exceeded.
98
)%
)%
The quantity of Flexible keys programmed exceeds the
system’s capacity.
Program Code FB
Sub-
parameter
Error Descriptions