System Error Codes
Station Programming Error Codes
Strata CTX Programming - Part 4: Appendices 6/04 B-11
System Error Codes
49
)%
700
790
800
810
820
830
The feature code(s) allowed to attendant console only is
registered.
49
)%
610
Two or more DSSs with the same value are registered to one
extension.
49
)%
120
130
560
610
The entered DN does not exist in the system.
51
The Primary DN entered conflicts with a value of an existing
numbering scheme.
51
)%
110
The secondary/phantom DN entered cannot be registered.
The number conflicts with an existing number scheme.
51
)%
120
130
When setting an owner extension to the additional information
of CO, GCO, the said CO, GCO keys are not assigned to the
Feature buttons of the owner extension.
52 -
The Primary DN entered conflicts with an existing DKT
extension.
52
)%
110
The secondary/PhDN entered cannot be registered. The
number conflicts with an existing ISDN extension(s), etc.
52
)%
120
130
The CO or GCO Owner DN entered does not exist.
80
)%
The specified PrimeDN does not exist in the system.
82
The additional information assigned to the Feature Button is
invalid.
82 - 120 The line number entered does not exist.
96
The allowable number of GCO, POOL or PhDn has been
exceeded.
98 -
The number of Flexible buttons programmed exceeds the
system’s capacity.
216
51
)%
The entered DN does not exist in the system (the entered
value conflicts with an existing extension number or
numbering plan).
52
)%
The entered DN conflicts with an existing ISDN extension(s),
etc.
80
)%
The designated Prime DN does not exist in the system.
Program Code FB
Sub-
parameter
Error Descriptions
To Next Page
Loading...
