Toshiba Strata CTX28 - Page 474

System Error Codes
Station Programming Error Codes
B-12 Strata CTX Programming - Part 4: Appendices 6/04
217
33
)%
The Node ID entered is over maximum digits, or Node ID was
not entered.
51
)%
The entered DN does not exist in the system (the entered
value conflicts with an existing extension number or
numbering plan).
52
)%
The entered DN is not designated as an ISDN extension in
Program 202.
80
)% The designated DN does not exist in the system.
218
49
)%
49 )%
The DN entered is already assigned to another Hunt Group. A
DN can only be in one Hunt Group.
51
)%
The entered DN does not exist in the system (the entered
value conflicts with an existing extension number or
numbering plan).
52
)% The entered DN conflicts with an existing numbering plan.
80
)% The entered Hunt Group number does not exist in the system.
80
)% The entered DN does not exist in the system.
82
)%
The number of Hunt Group assignments has exceeded the
system capacity.
96
)%
The allowable number of Hunt Group member assignments
has been exceeded.
98
)%
More than 560 DNs are designated for members of one
hunting group.
219
33
)%
The Node ID entered is over maximum digits, or Node ID was
not entered.
250
32
)%
The MAC address entered includes invalid characters. The
valid characters are numerals and alphabet A(a) to F(f).
49
)%
Despite that “1:Fix” is selected in FB02, the fixed IP address
for this IPT is not registered in the system.
50
)%
Despite that “1:Fix” is selected in FB02, the fixed IP address
is not set in FB03.
51
The DN entered is not an IPT. (This number entered conflicts
with a value of an existing numbering plan.) FB which this
error occur : FB00
52
IPT is not assigned to this DN (DKT etc.).
FB which this error occur : FB00
80
The DN entered is an extension number that does not exist in
the system.
FB which this error occur : FB00
Note For FBs in Program 205, 213 and 215, codes shows the entered Feature Code.
Program Code FB
Sub-
parameter
Error Descriptions