System Error Codes
Trunk Programming Error Codes
Strata CTX Programming - Part 4: Appendices 6/04 B-19
System Error Codes
323
18
)%
Select the Type of Service for CBC.
33
)%
The Incoming Line Group entered is invalid.
33
)%
The Outgoing Line Group entered is invalid.
49
)%a)%
The same value is designated to the Type of Service, Facility
Code, Service Parameters, and Network ID fields that
correspond to the same channel group and different line
service index.
49
)%
The entered values in Channel Group and Index fields are not
valid CBC assignments. Select NODATA in Type of Service
field to delete CBC setting.
49
)%
)%
When an INWATS ILG is assigned in ILG field an Out WATS
Type of Service cannot be assigned.
49
)%
)%
If OUTWATS service is selected for Type of Service, an OLG
value must be assigned.
49
)%
)%
The selected ILG conflicts with an existing ILG number.
49
)%
)%
When an Out WATS OLG is assigned in OLG field an
INWATS Type of Service cannot be assigned.
49
)%
)%
Make a selection in OLG field.
49
)%
)%
The selected OLG conflicts with an existing ILG number.
49
)%a)%
The assigned minimum Bch value (Minimum Calls Zones
1~3) exceeds the related (Maximum Calls Zones 1~3)
maximum Bch value.
49
)%
)%
)%
The assigned minimum Bch value (Minimum Calls Zones
1~3) exceeds the related (Maximum Calls Zones 1~3)
maximum Bch value.
323
49
)%a)%
The B channel entered is invalid.
49
)%
The OLG entered does not exist in system.
49
)%
)%
The entered ILG/OLG values are not assigned ISDNs.
50
)%a)%
Make a Service Type selection for field 02.
52
)%
The entered channel number conflicts with an existing ISDN
extension(s), etc.
80
)%
The entered channel group number does not exist in the
system.
82
The Channel Group entered does not exist in the system.
82
)%
The allowable number of assigned channel groups has been
exceeded.
96
The number of allowable CBCs has been exceeded.
Program Code
Occurred
FB
Sub-
parameter
Error Descriptions
To Next Page
Loading...
