TP-Link JetStream L2 User Manual

115
 The configuration procedure for switch E and F is the same with that for switch D.
 The topology diagram of the two instances after the topology is stable
 For Instance 1 (VLAN 101, 103 and 105), the red paths in the following figure are connected
links; the gray paths are the blocked links.
 For Instance 2 (VLAN 102, 104 and 106), the blue paths in the following figure are connected
links; the gray paths are the blocked links.
 Suggestion for Configuration
 Enable TC Protect function for all the ports of switches.
 Enable Root Protect function for all the ports of root bridges.
 Enable Loop Protect function for the non-edge ports.
Enable BPDU Protect function or BPDU Filter function for the edge ports which are connected to
the PC and server.
Return to CONTENTS

TP-Link JetStream L2 Specifications

General

Brand	TP-Link
Model	JetStream L2
Category	Switch
Language	English